Can You Safely Use an Infrared Space Heater at Night in Your Room?

No comments

The words ‘winter’ and ‘chilly’ complement each other. Even if the temperature outside is harsh; you can still enjoy it in your home under a toasty blanket, with a book in your hand, and sipping wine. You can also gaze outside the window to see the wonderland and falling snow.
But what will happen if your indoor space is as chilly as the outdoor one? If you can’t afford to pay the high monthly bills by using traditional heaters, you probably need to search for a better option to maintain the room temperature. A bit of research will let you know about infrared space heaters. It may sound good, but you might remain concerned about the safety issues of these electrical appliances.

The good news is that modern infrared heaters are very safe to use even when left unattended during the night, even while you are sleeping. But ensure that you are using a reputed infrared space heater that is certified by three testing organizations and contains the features like tip-over protection, automatic shutoff, adjustable thermostat, and shutoff timer.

Best Practices for using an Infrared Space Heater

Although you might be concerned about leaving the infrared heaters to switch on for a whole night, by following the below-mentioned guidelines, you can easily use these heaters at night as they are completely safe to do so.

Keep heaters away from flammable things.

It would help if you kept your heater in an appropriate place to ensure safety. You should keep the heater 3 feet away from things like curtains, pillows, beds, blankets, rugs and clothes. Also, please keep it away from furniture like sofas, chairs, etc. Put them on a wooden floor instead of a carpet. Always remember that your space heater needs space.

Make use of a grounded outlet.

Usually, heaters use 1,500 watts of power when run at their full capacity. That implies the circuit overloading will happen if you run too many devices simultaneously. Also, avoid plugging the infrared heater into an extended cord, as it may not be designed to run a lot of wattage through it. Ensure to use a grounded outlet that contains three prongs. Avoid two-prong sockets, as they don’t provide any way to ground the electricity.

Avoid using the heater as a supplemental dryer.

As already discussed, you must put your heater away from flammable materials. Hence don’t use it to dry your clothes. Never drape towels, socks or other items near the heater. Any of these items could catch fire if they come in contact with the heater. Clothes can also block the vents, which may result in overheating.

Now, you might have understood that if used safely, infrared heaters can keep you warm in winter without putting much burden of electricity bills on your pocket.

Infrared Space Heater

Features to look in your Infrared Indoor Heater

To ensure safety, check the below features in your infrared heater:

  • Automatic Shut off: Your heater should sense the temperature rise. This way, it will automatically come in shut down mode and avoid the risk of sparking or fire.
  • Tip-over protection: It is especially important if you have kids and pets in your home. This feature allows the heater to shut down if knocked over. It will protect you from any hazards if anyone runs over the heater at night.
  • Safety certification: You must check the labels of the reputed company on the heater, which shows that the product meets the safety standard and has undergone three-level testing.
  • Timer: This feature will allow you to decide how long your heater will be switched on during nighttime. This feature will allow the heater to switch off automatically as per your settings. It is a crucial feature during nighttime.

Know about Space Heaters

Before you decide which heater will be the best for your home, you must know the basics of a space heater. Unlike the traditional centralized heaters, which heat the entire home, space heaters will only heat the room you are using. These heaters use convection and radiation to heat the space and are available in various shapes and sizes.

New Heaters vs Old Heaters

Modern heaters have many benefits over traditional ones. They use new technologies which offer greater efficiency and safety. If you are looking for a portable heater, you must ensure that it never becomes a safety hazard for your family. New space heaters usually have an automatic shutoff feature, which keeps you away from residential fires. Safety is an uncompromising factor for everyone. Hence it’s always better to go with infrared heaters as they also have a wireless remote thermostat to control them remotely or through a mobile app even when you are not at home.

Final Takeaway

So how will you ensure that infrared space heaters are safe for you? Follow the above guidelines to make the maximum utilization of these heaters without facing any safety hazards.

SundirectCan You Safely Use an Infrared Space Heater at Night in Your Room?
Read more

Tips on Buying an Infrared Blackboard Heater for Your Home

No comments

An infrared heating system is a new concept for many people. It is understandable to have questions about how this reasonably new heating system for homes works. For some houses, infrared heating might be the perfect solution for all home heating issues. How ideal is an infrared blackboard heater for your home depends on several factors.

This detailed buying guide will explore modern infrared heating systems and share some tips for buying the best-infrared blackboard heater for your home.

What is an infrared heater?

The infrared heating system works by emitting radiant heat, which is the same as when you feel the warmth of the sunlight coming through the window. The heat of the infrared blackboard heater is absorbed by the surfaces and objects in the room and then re-radiated. Through this effect, the things in the room are gradually warmed, providing an enduring form of warmth throughout the day. This is why these heaters are so popular. An infrared space heater can use electricity much more efficiently to heat homes and keep them warm for a longer duration.

Interestingly, contrary to what most people believe, infrared heaters do not heat the air. Infrared radiations travel through the air until they directly contact a person or object. This adds to the efficiency of infrared heaters as no heat is lost in transmission through the air.

How to choose the right infrared blackboard heater?

Decide the type of infrared heaters 

One of the most critical aspects of an indoor infrared heater is the electromagnetic spectrum. The radiations are categorized based on the wavelength, which measures their ability to transfer heat at a distance.

Infrared radiations are categorized as far-infrared, mid-infrared, and near-infrared. When buying an infrared blackboard heater, you should pay attention to its band of wavelengths.

Far Infrared: The gentlest form of infrared gets easily absorbed by the human body. Far infrared creates a more profound sensation of heat which is why it is used in saunas to assist muscle relaxation. An infrared space heater uses far-infrared as it is mellow enough for a broad range of applications.

Longwave Infrared: Both far-infrared and longwave infrared are very similar, so they are often used interchangeably. However, longwave infrared is slightly stronger than far-infrared. A longwave infrared heating system transmits heat at a higher temperature making it suitable for greater distance applications.

If you want to buy an infrared blackboard heater for a spacious area, choose one that uses longwave infrared. These heaters are usually used for lofty interiors with high ceilings, such as churches and meeting halls.

Mediumwave Infrared: As the term suggests, this infrared falls between the intense heat transmission of shortwave radiation and the gentle, long-lasting heating sensation of far infrared. Mediumwave infrared heating systems provide a higher heating temperature suitable for harsh winters. However, you have to sit closer to the heater as they are not as efficient at transmitting heat as the far or longwave infrared heaters.

Shortwave or Near-Infrared: This infrared is used by outdoor heating systems. Shortwave infrared radiates intense heat, so it is used in infrared heating systems designed to offer on-demand heating outside when temperature levels drop. However, this type of infrared heating system is not suitable for all-day heating as it can start to feel overbearing soon.

Near-infrared gets easily absorbed by water, and its heat dissipates quickly, so its warming sensation on the body feels shallow.

Model of infrared heating system 

Wall-mounted infrared blackboard heaters work best because they are designed to radiate a larger infrared volume. The larger surface area of infrared mirror heater can heat the space much more efficiently without losing heat to propagate through the air. An infrared heating system uses far-infrared, which offers a much more relaxing heat sensation.

Due to their energy efficiency and use of far infrared, these heaters can work at a lower surface temperature than traditional sauna heaters. The infrared blackboard heater model is cost-effective and energy-efficient to use.

 

Type of controls 

When buying an infrared blackboard heater for indoor use, you need to ensure that it comes with accessible operation functionalities. The presence of a wireless remote thermostat is a must to control the heater’s temperature without physical touch.

Also, the finish of the product should match your room interiors. There are designer heaters available. Models like an infrared picture heater integrate flawlessly with the aesthetic of indoor spaces. Buy such models to ensure that your infrared heating system does not stand out like an eyesore.

Conclusion 

An infrared blackboard heater is an excellent choice for your home. It offers the ability to heat the spaces without using too much electricity or wasting heat. With the availability of designer models, you can use these heaters indoors without worrying about running the aesthetics of the spaces.

SundirectTips on Buying an Infrared Blackboard Heater for Your Home
Read more

What To Look For When Choosing Framed Infrared Panel Heater?

No comments

Many forms of heaters are used nowadays. For example, an electric firepit heater is installed to heat a small place. In the lounges or living rooms, traditional heaters are used. However, these technologies are not efficient and don’t have an aesthetic appeal.

Owing to this reason, people use the indoor infrared heater Austria. This type of appliance is aesthetically pleasing and more efficient than other heaters. However, choosing the best product from the long list is not easy. You have to consider so many things that mistakes are bound to happen, especially when you aren’t careful enough.

That’s why we have discussed a few factors to help you make the best buying decision. After all, you cannot let your investment go down the drain.

Features to look in framed infrared panel heater

Size and shape

The first thing you need to focus on is the size and shape of the framed infrared panel heater. They either come in a square or rectangular shape. Your choice should be based on the area you want to heat up, as a rectangular panel heater has more surface area.

Besides, it’s crucial to look for the right size of the appliance. If the room is larger or you want to heat more air volume, go for the larger panels. On the contrary, a medium-sized heater will be more than enough for smaller areas. To determine the right size of the appliance, consider the area of the room, the distance between two opposite walls, and the height of the ceiling.

Installation location

The panel heaters can be installed anywhere inside the house, like your bedroom, lounge, dining area, and more. Therefore, you must decide where you want the appliance. For example, if you want the heater in your bedroom, install it right above the bed at a central location. Similarly, choosing the opposite wall will be best for installing the panel heater for a narrower lounge or living area.

No matter what, the chosen place of installation should be such that the heat can be spread evenly throughout the room. Besides, it shouldn’t damage anything else by focusing on the hot, infrared radiations.

Wattage/ power consumption

Make sure to check how much power the infrared heating system will consume. Usually, these framed panel heaters consume much less electricity than other heating units. Therefore, make sure to choose a product having a higher wattage rating.

For example, let’s say the chosen product is rated at 250W, and your room needs a power of at least 300 watts to get heated up. The framed panel heater will consume more energy to deliver the required amount of power. This will ultimately result in excessive current consumption and high bills. You can solve this problem by buying a panel infrared heater with 300 or more wattage.

Control modes

There are two control modes you can find in the infrared mirror heater– thermostat and remote. If you want to connect all the panels and create a central heating system, go for a compatible product with the thermostat. Moreover, it will give you an upper hand in controlling the temperature accurately and preventing energy wastage.

On the other hand, for localized panels, installing the thermostat will be simply a wastage of money. Therefore, for such cases, remote-controlled products are more suitable. You can efficiently operate the heating panels individually as per your requirement.

Wireless/ remote operations

If you are looking for more advanced panel infrared heaters, look for products that come with wireless connectivity options. With this, you can synchronize the panel with your mobile app quickly. All the features, modes, power on/off, and other such controls will be present in the app itself.

Therefore, you don’t have to move from your comfort zone to alter the temperature or select a mode. These tasks can be done easily through the app, even when the concerned panel heater is not in close vicinity.

Zonal heating feature

Some products are reinforced with wireless remote thermostat to control zonal heating. For example, let’s assume you have installed three panels at each end of the master bedroom and the other on the balcony.

So, using this feature, you can switch on one infrared heating panel only while the others remain switched off. Similarly, you can increase the temperature of one panel while the other one’s temperature stays constant.

Safety features

No matter what kind of product you have chosen, you must ensure that it is reinforced with safety features. If there is excessive electric consumption, the product should cut off the power supply. This will keep the heating element and other parts safe from overheating and short circuits.

Similarly, its surface should be adequately insulated. This way, you won’t injure yourself even if you accidentally touch it. Check whether the electrical safety standards are made or not, like the TSL certification, IP rating, and so on.

Conclusion

As you will find several infrared picture heater products in the market, make sure to choose only the best out of the list. If you end up with the wrong one, your investment won’t be fruitful. Besides, the heater won’t increase the room temperature as per the expectations.

SundirectWhat To Look For When Choosing Framed Infrared Panel Heater?
Read more