To meet the demand of a simple but smart Wifi control, we developed Smart Plug, an innovative control solution that was specifically designed to work with all of the Sundirect “Plus” range infrared panel heaters.
Usually, Wifi thermostats require hard wiring due to the fact that Wifi thermostats need constant power supply. Most of the end-users can’t do the hard wiring on their own but need help from an electrician. Regular plug thermostats will need to be plugged from the heater to the thermostat which is bulky and not aesthetically pleasing and usually, they don’t offer any Wifi option. Just plug the Smart Plug to the electrical socket and you can start to control your Sundirect infrared panel heater freely without any hard wiring.
Sundirect Smart Plug offers a modern design with its acrylic surface and touch screen, which allows you to have simple but all the necessary temperature controls. With the Sundirect Smart App, you are able to set up a more sophisticated heating program, using different operation modes such as manual, smart and holiday mode. The whole set up is very easy and takes just a few minutes without the help of any electrician. You can save about 25% energy using Smart Plug compared to a basic heating thermostat. One Smart Plug can pair to several “Plus” infrared panels at the same time, and the combination is ErP (Ecodesign) approved.
Power: 220-240V, ~50Hz
Available Plug type: Schuko/Swiss Plug
Control: 433MHz RF control from the Smart Plug to the heaters. Wifi controllable via Sundirect Smart to the Smart Plug
Operating temperature: 5-37°C
Control distance: 35m without obstacles
Controlling units: One Smart Plug can control several Plus panels if within communication distance