Many forms of heaters are used nowadays. For example, an electric firepit heater is installed to heat a small place. In the lounges or living rooms, traditional heaters are used. However, these technologies are not efficient and don’t have an aesthetic appeal.
Owing to this reason, people use the indoor infrared heater Austria. This type of appliance is aesthetically pleasing and more efficient than other heaters. However, choosing the best product from the long list is not easy. You have to consider so many things that mistakes are bound to happen, especially when you aren’t careful enough.
That’s why we have discussed a few factors to help you make the best buying decision. After all, you cannot let your investment go down the drain.
Features to look in framed infrared panel heater
Size and shape
The first thing you need to focus on is the size and shape of the framed infrared panel heater. They either come in a square or rectangular shape. Your choice should be based on the area you want to heat up, as a rectangular panel heater has more surface area.
Besides, it’s crucial to look for the right size of the appliance. If the room is larger or you want to heat more air volume, go for the larger panels. On the contrary, a medium-sized heater will be more than enough for smaller areas. To determine the right size of the appliance, consider the area of the room, the distance between two opposite walls, and the height of the ceiling.
The panel heaters can be installed anywhere inside the house, like your bedroom, lounge, dining area, and more. Therefore, you must decide where you want the appliance. For example, if you want the heater in your bedroom, install it right above the bed at a central location. Similarly, choosing the opposite wall will be best for installing the panel heater for a narrower lounge or living area.
No matter what, the chosen place of installation should be such that the heat can be spread evenly throughout the room. Besides, it shouldn’t damage anything else by focusing on the hot, infrared radiations.
Wattage/ power consumption
Make sure to check how much power the infrared heating system will consume. Usually, these framed panel heaters consume much less electricity than other heating units. Therefore, make sure to choose a product having a higher wattage rating.
For example, let’s say the chosen product is rated at 250W, and your room needs a power of at least 300 watts to get heated up. The framed panel heater will consume more energy to deliver the required amount of power. This will ultimately result in excessive current consumption and high bills. You can solve this problem by buying a panel infrared heater with 300 or more wattage.
There are two control modes you can find in the infrared mirror heater– thermostat and remote. If you want to connect all the panels and create a central heating system, go for a compatible product with the thermostat. Moreover, it will give you an upper hand in controlling the temperature accurately and preventing energy wastage.
On the other hand, for localized panels, installing the thermostat will be simply a wastage of money. Therefore, for such cases, remote-controlled products are more suitable. You can efficiently operate the heating panels individually as per your requirement.
Wireless/ remote operations
If you are looking for more advanced panel infrared heaters, look for products that come with wireless connectivity options. With this, you can synchronize the panel with your mobile app quickly. All the features, modes, power on/off, and other such controls will be present in the app itself.
Therefore, you don’t have to move from your comfort zone to alter the temperature or select a mode. These tasks can be done easily through the app, even when the concerned panel heater is not in close vicinity.
Zonal heating feature
Some products are reinforced with wireless remote thermostat to control zonal heating. For example, let’s assume you have installed three panels at each end of the master bedroom and the other on the balcony.
So, using this feature, you can switch on one infrared heating panel only while the others remain switched off. Similarly, you can increase the temperature of one panel while the other one’s temperature stays constant.
No matter what kind of product you have chosen, you must ensure that it is reinforced with safety features. If there is excessive electric consumption, the product should cut off the power supply. This will keep the heating element and other parts safe from overheating and short circuits.
Similarly, its surface should be adequately insulated. This way, you won’t injure yourself even if you accidentally touch it. Check whether the electrical safety standards are made or not, like the TSL certification, IP rating, and so on.
As you will find several infrared picture heater products in the market, make sure to choose only the best out of the list. If you end up with the wrong one, your investment won’t be fruitful. Besides, the heater won’t increase the room temperature as per the expectations.